| When
you encounter a problem during barebone assembling, first try to go
through the recommendations followings. |
|
1. Check to see if the problem persists when all the external devices
are removed.
|
|
2.
Check if any incorrect or loose cable connections. Make sure the
latches on the connectors latch securely on to the receptor end.
|
|
3.
Be sure all the device drivers are installed properly.
|
|
4.
Be sure you have not performed an incorrect setting on the hardware
devices in the BIOS Setup utility. A faulty setting may cause the
system to misbehave.
|
|
5. Not all peripheral are plug-and-play capable. You need to restart
the system with these devices powered up and connected first.
|
|
6. Be sure to go to BIOS setup and load DEFAULT setting after any
BIOS updated.
|
|
7. If external devices such as Keyboard, mouse, USB camera, scanner,
SCSI card… do not work correctly when connected to the system, usually
it's the device's own problem. Consult the device's manufacturer
first.
|
| |
|
FAQ
|
| |
|
LCD
PC system won't start.
|
|
Check
if power cord is connected properly.
|
| |
|
he
system starts, but there is no display.
|
|
1.
Check if the VGA plug connected properly to the Video port.
|
|
2.
Check the LCD Panel settings and brightness
|
|
3.
Shutdown the PC, disconnect the power and check if the graphics
card is correctly installed.
|
| |
|
Hard
drive or Optical drive error
|
|
1.
Check drive configuration in BIOS.
|
|
2.
Check drive jumper settings (master/slave).
|
|
3.
Check drive cables are properly connected.
|
|
4.
Check the correct drivers have been installed.
|
| |
|
Memory
Error
|
|
1.
Check the user's manual of mainboard & memory to see if installed
the correct type of memory.
|
|
2.
Shutdown the system, disconnect the power and check if the memory
is correctly installed.
|
| |
| No
Speaker output |
|
1.
Check if the audio cable connected properly to the Lin-out port.
|
|
2.
Check if the monitor volume value is set properly.
|
|
|
|
©
2012 Top Tech International Co., Ltd.. All rights reserved.
|