Power Saving Product

Our power saving device is a power voltage / current ratio improvement device. It can be used in every kind of power-consumed equipments (Inductance loading / resistance loading type). Based on the theory of Micro-magnetism and Electromagnetic balance, it uses the special auto reactor wave filtering technology to adjust the unstable power to the adequate status; also, to eliminate high harmonics, increase power quality and efficiency, and extend the life of power consumed equipments. On top of that , to save power utilities and electricity bills..

The internal material of this dynamometer is the high-quality conductor (Solid State Mica) which has the characteristics of low resistance and low power consumption. It has no electronic structure of passive components which means it can operate for years and has very low possibilities to worn-out. It has no need to add the lubricating oil regularly. It follow the H-grade insulating standard which has temperature durability up to 180° C(Dry type). It has high reliability on quality and will not be affected by temperature or humidity under the normal circumstances. Furthermore, it will not cause any interference during the operation of electrical equipments

After installing our power saving dynamometer, not only the incoming power can be managed more effectively; the power quality be improved; and the voltage becomes steady, the power consumed equipments also receive more protections and the product life literally be extended. On top of that, through saving the power, the overloading of the voltage transformer can be eased efficiently.

Product Type

	Household Type	Shop Type	Factory Type	High Voltage Type
Product Picture
Product Specifications	High Voltage product: From 10KV~35KV(Including 35KV, 22KV, 10KV, 6KV(Capacity 300KVA~15000KVA) Low Voltage product: 220V-440V single phase or triple phase (Including 35KV, 22KV, 10KV, 6KV(Capacity 10KVA~2000KVA)
Applications	Air condition, heater, refrigerator	Business air conditioner, heater, electric lighting system	50KVA~200 or above motor machine	1000KVA~ 10000KVA Big super retailer, heavy motor equipment.
Size	11cmX6cmX5cm	26cmX22cmX13cm	50cmX35cmX65cm	80cmX50cmX130cm

Product Installation flow chart

This equipment needs to serial-connect twice to the master switch which located on the back of power meter. Since it is nstalled behind the electric power meter, it will neither damage the meter, nor have the power-stealing concerns.

• Circuit loop before installing: Power company external electricity line --- electric power meter --- master switch ---transformer --- power consumption end
  

• Circuit loop after installing: Power company external electricity line --- electric power meter --- master switch --- power saving device --- transformer --- power consumption end

* Download Detailed product installation procedure

Our Promises

1. Safety:

• Certified by The Taiwan Bureau of Standards, Metrology and Inspection (BSMI) (Certificate no. : 90309007701) .*More certificates and test reports

• Qualified by the Electronic testing center.

• Insured product liability TWD 100 million.

• The power saving device was installed in the backbone switch which has better adaptability and economic effects.
  
  
• Safety Test qualiifed by The People's Republic of China GB/1706.1-1998 and GB/T2900.15- 1997.
  
  
• "National Quality Guarantee Golden Award Certificate" Received

2. Effectivity:

• Eliminate polluted power effectively. Improve unbalance phase. Guaranteed to save electricity bill at least 10%.(Fully refund if the on-site test did not reach 10% power saving.

• Keep the current and voltage on an approciate condition, the sine-squared pulse will be stablized. It can extend the product life of inductive devices.

• The tolerrance range of current breaker increases at least 5%. Increasing power ratio. (up to 3%-5%) , increasing the effective electricity.

• Decreasing the “impulse currents’ on the delicate electronic devices like computers, stereo system.
  

• By adjusting the power effeciency, it can increase the ROI (return of investment) of effective power.

3. Product Warranty:

• 2 years full warranty. After that, 8 years warranty for repairing. There's no electronic components in this device, so the defective rate is extremely low.
  

4. Contract Warranty:

• Our guaranteed of power saving efficiency at least 10% will be written in the contact

• Any legitimacy or safety issues happened, we are willing to provide the full refund and take all the legal responsibilities.

• Guarantee 10-30% electricity bill saving for corporate type customers. Otherwise, full money back and responsible for uninstalling the euqipemnt for free.
  

5. Legitimacy:

During the installing,

• Not break the seal of electronic power meter

6. Quick Money Back

• High Return of Investment (ROI) rate. Money back within averagely 1-2 years for the business users.